Cabinet Door Support Hinge

Competitive Advantages:

  • 15 Years Experience
  • 500000 Pieces/Day
  • Quality Guaranteed
  • Custom Design Drawing
  • Custom LOGO
  • In Time Delivery
  • OEM/ODM Service

Product Category

Get a free quote

Product Description

Cabinet Door Support Hinge
Type: Furniture Hinge
Hydraulic self closing hinges
Material: Cold rolled steel
Finish: Nickel
Application: Furniture
Door thickness: 14mm-24mm
Diameter of cup: 40mm
Hole depth: 11.5mm
Hinge is used to connect two solids and allow relative rotation between them. Hinges can be made of movable components or foldable materials. Hinges are mainly installed on doors and windows, while hinges are more installed on cabinets. According to material classification, they are mainly divided into stainless steel hinges and iron hinges. Hydraulic hinges (also known as damper hinges) have appeared to make people enjoy better. Their characteristics are that they bring cushioning function when cabinet doors are closed and minimize closure of cabinet doors. Noise from collision with cabinet.
Spring hinges are mainly used for cabinet doors and wardrobe doors, which generally require a thickness of 18-20 mm. From the material, it can be divided into: galvanized iron, zinc alloy. From the performance point of view, it can be divided into two categories: drilling, without drilling. It is what we call a bridge hinge without drilling holes. The bridge hinge looks like a bridge. Its characteristic is that it does not need to drill holes in the door board, and it is not limited by the style. Hole-punching hinges are spring hinges commonly used in cabinet doors. Its characteristic is that the door plate must be holed, the style of the door is limited by hinges, the door will not be blown open by the wind after closing, and there is no need to install any spiders.
In addition to visual measurement and smooth handle hinges, attention should be paid to the reset performance of hinged springs. The quality of the reed also determines the opening angle of the door panel. A good quality reed can make the opening angle exceed 90 degrees.

Cabinet Door Support Hinge installation steps:
A. According to door leaf and side plate, choose the appropriate way of installation(Full overlay, Half overlayer, Insert). According to the specification, make sure of the number of hinges, and draw lines at the appropriate place. Make holes on the door leaf.
B. Place the hinge cup into the door leaf, and fix it with screws.
C. Fix the base plate at the corresponding place on the side plate.
D. Raise the door leaf, and insert hinge into the base.
E. Adjust the upper and lower positions of the door leaf.
F. Adjust the left and right positions of the door leaf.
G. Adjust the front and back positions of the door leaf, making the door open smoothly.
H. Screw down all the screws, and cover the decorative lid.