Drawer Cold-rolled Slide
Material: cold-rolled sheet
Size: 10-24 inches
Finish: black,white zinc
Usage: drawer,wardrobe, cabinet
Type: sliding rail
service life: stretch 50000
Drawer Cold-rolled Slide breadth: 45MM
Friendly service and prompt reply within 24 hours.
In stock service.
Accept any customized order.
Professional & experienced staff help you solve problems.
Good after-sales service provide, contact us if you have any questions.
Spring hinges are mainly used for cabinet doors and wardrobe doors, which generally require a thickness of 18-20 mm. From the material, it can be divided into: galvanized iron, zinc alloy. From the performance point of view, it can be divided into two categories: drilling, without drilling. It is what we call a bridge hinge without drilling holes. The bridge hinge looks like a bridge. Its characteristic is that it does not need to drill holes in the door board, and it is not limited by the style. Hole-punching hinges are spring hinges commonly used in cabinet doors. Its characteristic is that the door plate must be holed, the style of the door is limited by hinges, the door will not be blown open by the wind after closing, and there is no need to install any spiders.
In addition to visual measurement and smooth handle hinges, attention should be paid to the reset performance of hinged springs. The quality of the reed also determines the opening angle of the door panel. A good quality reed can make the opening angle exceed 90 degrees.