Two Way Cabinet Hinge
Material: cold rolled steel ,stainless steel
The hinge cup diameter: 35mm
The hinge cup depth: 11.5mm
Door thickness: 14-24mm
Kinds: concealed or hydraulic, slide on or clip on hinge
Optional: Arm cover with or without,cup cover with or without
Category: Full overlay,half overlay,inset
Opening angel: 90-110 degree
Package: according to customer requirement
Application: Doors and frames
Spring hinges are mainly used for cabinet doors and wardrobe doors, which generally require a thickness of 18-20 mm.
From the material, it can be divided into: galvanized iron, zinc alloy. From the performance point of view, it can be divided into two categories: drilling, without drilling. It is what we call a bridge hinge without drilling holes.
The bridge hinge looks like a bridge. Its characteristic is that it does not need to drill holes in the door board, and it is not limited by the style. Hole-punching hinges are spring hinges commonly used in cabinet doors. Its characteristic is that the door plate must be holed, the style of the door is limited by hinges, the door will not be blown open by the wind after closing, and there is no need to install any spiders.
In addition to visual measurement and smooth handle hinges, attention should be paid to the reset performance of hinged springs. The quality of the reed also determines the opening angle of the door panel. A good quality reed can make the opening angle exceed 90 degrees.